2023
Integration of renewable energy sources and energy infrastructure
Edited by: Zafar Said, Haris M. Khalid
Energy and material recovery in waste management
Edited by: Shrikaant Kulkarni
Page 1 of 2
This paper compares the sensitivities and accuracies of four different optoelectronic transducers in measuring solar irradiance for the fabrication of portable and low-cost pyranometers. Trans-impedance condit...
The current study complements a broader body of research on solar distillation, including research on heat recycling capabilities and other related factors in multistage solar distillation systems. Solar still...
Wood pellets have gained global attention due to their economic availability and increasing demand for bioenergy as part of sustainable energy solutions. Management of the wood pellet supply chains, from feeds...
This study investigates the asymmetric impact of oil price (OP) on the ecological footprint (EF) in the major oil-producing African countries over the period 1988–2018. Results from the dynamic seemingly unrel...
Modern offshore and onshore green energy engineering includes energy harvesting—as a result, extensive experimental investigations, as well as safety and reliability analysis are crucial for design and enginee...
Renewable energy sources like sun and wind are intermittent, hence a hybrid system incorporating them is necessary. However, certain systems are more cost-effective and efficient than others, and they are not ...
The International Renewable Energy Agency predicts that with current national policies, targets and energy plans, global renewable energy shares are expected to reach 36% and 3400 GWh of stationary energy stor...
Solar power on Earth is characterized by its intermittent nature, limiting its practical application to peak loads only. However, this limitation can be overcome by implementing a concept known as Satellite So...
Malaysia targets to achieve an energy mix that is inclusive of at least 20% of renewable energies by the year 2025. Large-scale solar photovoltaic system (LSS-PV) emerged as the most preferable choice in Malay...
The substitution of fossil fuels, especially coal, with renewable energy is a crucial step for the CO2 emissions reduction and the avoidance of Global Climate Change. The electric power generation industry is the...
The naturally occurring heat inside the earth is renewable and sustainable and is known as geothermal energy. It is a renewable energy source that may be used in various applications, including milk pasteuriza...
Globally, the construction industry is experiencing an increase in energy demand, which has significant environmental and economic repercussions. To address these issues, it is now possible for buildings, vehi...
Among the Concentrated Solar Collector (CSC) technologies, Parabolic Trough Collector (PTC) is the most mature and commercialized CSC technology today. Currently, solar PTC technology is mainly used for electr...
One of the biggest causes of worldwide environmental pollution is conventional fossil fuel-based electricity generation. The need for cleaner and more sustainable energy sources to produce power is growing as ...
Wind potential estimation is generally evaluated using two-parameter (k, c) Weibull distribution. Root Mean Square Error (RMSE), Coefficient of Determination (R2) and Relative Error (RE) are computed in order to ...
While desalination of water is energy intensive, traditional use of fossil fuels makes it not only costly, but also unsustainable and environmentally unfriendly; utilization of solar energy for desalination is...
Hydropower plants are among the most efficient and reliable renewable energy systems in the world as far as electricity production is concerned. Run-of-river hydropower plants seem more attractive than convent...
Hot water supply is a daily necessity for various purposes ranging from industrial to domestic usage. However, the availability of hot water supply is dependent on reliable energy systems to heat the water. Th...
With the growing contribution of wind power to the electric energy supply, fluctuation in available wind energy might increasingly become part of public debate. Fluctuation influences energy prices and might l...
For the last 20 years, solar collectors have been developing rapidly in the use of energy in buildings. Under experimental conditions, the solar energy utilization efficiency (SEUE) of flat plate solar collect...
Texas has seen a rapid decline in coal use in recent years, but still burns more coal and emits more carbon dioxide and sulfur dioxide than any other state. Coal’s share of power generation in the Electric Rel...
This study investigates the techno-economic feasibility of installing a 3-kilowatt-peak (kWp) photovoltaic (PV) system in Kathmandu, Nepal. The study also analyses the importance of scaling up the share of sol...
Integrating different energy resources, like solar PV, wind, and hydro is used to ensure reliable power to the rural community loads. Hybrid power system offers sufficient power supply for the rural villages b...
Large-scale solar is a non-reversible trend in the energy mix of Malaysia. Due to the mismatch between the peak of solar energy generation and the peak demand, energy storage projects are essential and crucial...
An amendment to this paper has been published and can be accessed via the original article.
Solar collector (SC) technology has proved promising applications in heating, desalination, refrigeration of water, etc. Thermal performance (TP) of Heat Pipe (HP) improves by combining the various profiled ab...
The use of wind energy worldwide has overgrown in recent years to reduce greenhouse gas emissions. Wind power is free, but the installation and maintenance of wind turbines remain very costly. The size of the ...
Currently, the nine islands of the Autonomous Region of the Azores have fossil fuel-fired power stations as the main source of electric power. Each island has an independent electrical system classified as an ...
The traditional vegetable drying (open-air/sun drying) method of harvesting of tomato, potato and onion in the Fogera District in Amhara regional state, Ethiopia, leads to loss of product, reduction in the qua...
For clean hydropower generation while sustaining ecosystems, minimizing harmful impacts and balancing multiple water needs is an integral component. One particularly harmful effect not managed explicitly by hy...
The electrode plays an important role in dye-sensitized solar cells (DSSCs). Preparation of the electrode should be simple and should result in high performance of its DSSC. We herein demonstrated high-perform...
A novel genetically themed hierarchical algorithm (GTHA) has been investigated to design Fresnel lens solar concentrators that match with the distinct energy input and spatial geometry of various thermal appli...
Distributed generations (DGs) are small generating plants which are connected to consumers in distribution systems to improve the voltage profile, stability improvement, reduction in power losses and economic ...
Eight vegetable dyes extracted from flowers, fruits and leaves abundant in the wide biodiversity of the Andes region of South America were extracted with ethanol without purification to explore as vegetable ph...
As wind and solar power installations proliferate, power grids will face new challenges in ensuring consistent coverage from variable renewable resources. One option to reduce variability is to integrate the o...
In power systems, increasing the renewable energy penetration with small signal stability is one of the demanding and critical tasks in recent days. This research work aims to develop a multistage optimization...
A self-replicating rapid prototyper (RepRap) is a type of 3-D printer capable of printing many of its own components in addition to a wide assortment of products from high-value scientific or medical tools to ...
Distributed generation (DG) is small generating plants which are connected to consumers in distribution systems to improve the voltage profile, voltage regulation, stability, reduction in power losses and econ...
This paper presents a low-cost solution of virtual instrumentation to provide a new technique for real-time instrumentation of the PV panel characteristics such as voltage, current and power. The system design...
Pumped storage hydroelectric power plants are one of the most applicable energy storage technologies on large-scale capacity generation due to many technical considerations such as their maturity, frequency co...
This paper aims to analyze the comparative attractiveness of either investing in various renewable energy sources or continue using coal for electricity generation in the Philippines. Using real options approa...
In the present study, a detailed investigation on air dust particles effect on photovoltaic (PV) model performance has been carried out. The scanning electron microscope analysis of the collected dust samples ...
The purpose of this paper is to present a performance comparison between two maximum power point tracking algorithms. These two algorithms are incremental conductance (INC) which is an improved version of the ...
This paper presents a new approach for the determination of the wind speed distribution based on wind speed data. This approach is based on the fact that, in general, wind speed distributions restricted to sea...
Successful integration of renewable energy sources like wind power into smart grids largely depends on accurate prediction of power from these intermittent sources. Production of wind power cannot be controlle...
Renewable energy sources are fast emerging as more reliable supplement of conventional energy sources. Among the various renewable sources, solar energy is most sought after in today’s world. Solar PV modules ...
The study focuses on the evaluation of global solar radiation on a horizontal level. The estimate of the solar layer was made on the basis of mathematical model obtained from the relations of Angstrom–Prescott...
Distributed generator (DG) resources are small scale electric power generating plants that can provide power to homes, businesses or industrial facilities in distribution systems. Power loss reductions, volta...
Supply of additional power generation by wind system to increase total power generation is increasing exponentially and globally to meet the challenge of surplus power demand. This total power generation shoul...
Pure and fresh water is being scarce day by day. Although Bangladesh is a riverine country, pure drinking potable water is not a cheap commodity. Most of the people in the cities boil water to drink, and peopl...
Integration of renewable energy sources and energy infrastructure
Edited by: Zafar Said, Haris M. Khalid
Energy and material recovery in waste management
Edited by: Shrikaant Kulkarni